Como podemos ajudar?
Quer tenha uma pergunta sobre o LightWELD ou queira simplesmente saber mais sobre a soldadura laser portátil, um especialista em soldadura da IPG está pronto para o ajudar a encontrar a sua solução.
LightWELD®
Sistemas portáteis de soldadura e limpeza a laser
Material & Thickness Welding Range
Weld thick, thin, reflective, and dissimilar metals that are difficult or impossible with traditional methods, as well as materials with different electrical conductivity.
- High-speed welding across a wide range of materials and thicknesses
- Low heat input for minimal part distortion or deformation
- Built-in factory presets for all materials and thicknesses
- Weld with or without wire
Material
Stainless Steel
Galvanized Steel
Mild Steel
Aluminum (3 & 5 Series)
Aluminum (6 Series)
Nickel Alloys
Titânio
Cobre
LightWELD 2000 XR
Stainless Steelup to 0.313"
Galvanized Steelup to 0.313"
Mild Steelup to 0.313"
Aluminum (3 & 5 Series)up to 0.325"
Aluminum (6 Series)up to 0.229"
Nickel Alloysup to 0.281"
Titaniumup to 0.234"
Copperup to 0.129"
LightWELD 1000
Stainless Steelup to 0.156"
Galvanized Steelup to 0.156"
Mild Steelup to 0.156"
Aluminum (3 & 5 Series)up to 0.129"
Aluminum (6 Series)up to 0.129"
Nickel Alloys—
Titanium—
Copper—
“The travel speed and diversity of materials that can be welded is unbelievable”
Pre-Weld Cleaning
- Contaminants can enter the weld pool and compromise weld integrity
- Pulsed cleaning power up to 2500 W peak power evaporates undesired surface elements
- Fast and effective removal of contaminants such as oxides, rust, paint, oil, or grease from surface without the use of chemicals or abrasives
- Up to 0.6" of adjustable cleaning width with one pass
Post-Weld Cleaning
- Post-weld cleaning removes soot, debris, or any sign of localized heating
- Dramatically reduces time, cost, and scrap
- Create visually appealing welds while eliminating need for post-grinding
- Up to 0.6" of adjustable cleaning width in one pass
Built-in Wobble Welding
- Simple on-the-fly control of up to 0.2" of additional weld width with selectable frequencies for parts with imperfect fit-up
- Creates wider, more attractive seams
- Wobble parameters are preprogrammed and can be saved by the operator and recalled immediately as needed
- In cleaning mode, the wobble function provides adjustable cleaning scan widths up to 0.6"
Optional Wire Feeding Package
- Wire welding capability extends laser welding applications to increase the weld bead size or overcome poor part fit-up
- Can be used for stainless steel, mild steel, galvanized steel, nickel alloys, aluminum, copper, and brass
- Wire feed speed range 40 – 0.4 - 230 ipm (1 - 600 cm/min)
- Wire diameter capacity 0.030" - 0.063" (0.8 mm - 1.6 mm)
- Wire feed tips: 0.030", 0.035", 0.045", 0.063" (0.8 mm, 0.9 mm, 1.2 mm, 1.6 mm)
- 4X V-groove drive rolls and steel liners for hard wire, 4X U-groove drive rolls, and Teflon liners for soft wire
- Package includes wire feed unit, electrical connections, nozzle assembly, and LightWELD wire welding presets
